 |
•
SERVO DRIVES
DLD Little Drives
DIGIVEX
Speed
DIGIVEX Motion
TS8000 Touchscreens
PME Configuration tool
RTS DC Drives
•
SERVO MOTORS
Torque motors
ATEX motors
Brushless motors
Spindle
motors
DC motors
•
GEARBOXES
Worm gearboxes
Planetary gearboxes
Low-backlash gearboxes
|
| TORQUE
MOTORS
An
innovative solution for extruders |
|
1200
to 22100 N.m (water cooling) |
An
advantageous "direct drive" alternative to costly gearbox based systems
in extruders applications.
Parker torque motors are permanent
magnet brushless servo motors, especially designed to replace direct current or
induction motors associated with gearboxes on extruders applications.
Designed
to deliver high torque at low speed without any additional mechanical transmission
system, their usage results in more compact, more efficient, less noisy and maintenance
free drive systems.
More than just motors, Parker Torque Motors are complete
and ready-to-use “direct drives” systems, especially designed to fully
and effectively respond to Plastics and Rubber industries specific needs.
•
No maintenance
• Reduced energy consumption
(by about 5%)
• Silent operation (European
Directive 2003/10/CE)
• Increased compactness
| •
Torque range | 1200
- 22100 N.m (water-cooling) | | •
Shaft heights
| 200,
315 or 400 mm | | •
Rated Voltage | 400
VAC and 480 VAC | | •
Speed | 50
- 500 rpm (size dependent)
- Field weakening operation up to 1.2xnrated
-
Other speeds available on request | | •
Cooling | Water
Jacket as standard
- Natural ventilation with derating (consult us) | | •
Mounting | IMB3 | | •
Protection degree
| IP
54 | | •
Thermal protection | 1
x KTY sensor and 2 x PTC probes
- Temperature alarm and default | | •
Shaft end | Hollow
shaft with keyway as standard
- Customized interfaces available on request | |
•
Thrust bearing | SKF
294_E as standard | | •
Feedback sensor
| Endat
Encoder as standard
- High precision Endat Encoder (option)
- Resolver (option |
TMW
Series - 400 VAC Power Supply (1)
TMW
Series - 480 VAC Power Supply (1)
(1)
Other speeds
available, consult us
Shaft
height |
Thrust Bearing | Download
the drawing in pdf format | 200
mm | 29420 | | 200
mm | 29424 | | 315
mm | 29422 | | 315
mm | 29426 | | 315
mm | 29430 | | 400
mm | 29430 | | 400
mm | 29434 | | 400
mm | 29440 | |
© Copyright
2000-2011 Parker France - Dijon. All rights reserved.
|
