Parker groupVision, Technology, Innovation



• SERVO DRIVES





DLD Little Drives


DIGIVEX Speed



DIGIVEX Motion


TS8000 Touchscreens


PME Configuration tool


RTS DC Drives





• SERVO MOTORS
Torque motors

ATEX motors

Brushless motors

Spindle motors

 DC motors



• GEARBOXES


Worm gearboxes

Planetary gearboxes


Low-backlash gearboxes

 


LINEAR ACTUATORS


The SDD Parvex product range is growing with the offer of the linear actuators from Parker.

PowerRod:

PowerRod

Description :


PRA, PRC:

The PowerRod actuators PRA and PRR25 with outrigger bearings as well as the PowerRod components PRC consist of a primary element in IP67 and a stainless steel magnet rod containing rare earth magnets.

The PRA and PRC are available in 2 different sizes and 4 versions and offer a continuous force of 51 up to 276N with peak forces of up to 1860N.
PRA is available with strokes from 12 to 318mm and PRC is available with strokes of up to 1362mm (special sizes up to 2m are possible on request).

PRR:

The PRR25 is available in 4 versions and offers a continuous force of 61 to 119N with peak forces of up to 860N. The PRR is available with strokes ranging from 28 to 310 mm.
The PRR25 PowerRod actuator with outrigger bearings is available in a steel rods in ball linings or aluminium rods in polymer slidings bearings.
No external measuring system is required.
The integrated position sensor provides analog sine and cosine differential input.
Parker Hannifin offers a wide range of powerful servo controllers. In particular the devices from the Compax3 family.
All devices support easy setup and can be integrated into existing automation solutions.

LCB Compact Linear Actuator:

Description :
Simple, Economic and robust construction

Higher productivity, high quality and minimum set-up time thanks to LCB

Efficient operation

Available in 2 sizes and with drive packages

Easy installation and attachment to a system


The construction is simple, economic and robust:

. The LCB is a low-cost alternative to
conventional timing belt driven
linear actuators demanding
robustness combined with simple
construction.

. Low purchase and installation costs.

. Low operating costs:
- Maintenance-free (up to the wear limit of
   the sliding carriage)
- changing the replaceable slide can be
   carried out within a few minutes
- high service life
- due to the low moving mass, energy
   costs are reduced

 
LCB Compact linear actuator


The LCB is available in 2 sizes and with drive packages:

. The LCB linear actuator covers a
wide range of speeds, thrust forces
and payloads.

. LCB is available:
- as component with free shaft end
- fitted with a gearbox
- with a gearbox and servo or stepper
  motor drive
- with a gearbox and servo motor
  combined with a matching controller
  from Parker (Compax3 or SLVD)
- with a (direct-drive option) servo motor
  and Compax3 servo controller



The Electric Cylinder ET - Metrical :

for handling, positioning, feeding and setting

Electric Cylinder ET

 

 Features / Technical Data

For precise moving, positioning, setting and actuation the electro-thrust electric cylinder can provide the following features:
. High degree of mechanical efficiency
(up to 90%)
. Stroke lengths up to 2400mm
. High thrust / tractive forces up to 44.500N
. Repeatability ± 0.07mm (up to ± 0.01mm)
. Speeds up to 1 m/s
. Timing belt pulley drive (with parallel motor installation), available with 4 drive ratios
. Ballscrew pitches from 5 to 50mm/rev.
. 5 different frame sizes
. Available with servo motor drive or step
motor drive

 

Top

© Copyright 2000-2009 Parker SSD Parvex. All rights reserved.